2014 GMC Sierra Oil Change Guide: Quick & Easy Steps
Changing the oil in your 2014 GMC Sierra is very important. It keeps the engine running well. This guide will help you do it yourself.
Why Change Your Oil?
Oil is like the blood of your engine. It keeps parts moving smoothly. Over time, oil gets dirty. Dirty oil can harm your engine. Changing the oil helps keep your truck in good shape.
What You Will Need
Before you start, gather these items:
- Oil filter
- New oil (check your manual for the type)
- Oil filter wrench
- Socket wrench set
- Drain pan
- Funnel
- Rags or paper towels
- Gloves
Credit: www.justanswer.com
Step-by-Step Guide
Follow these steps to change the oil in your 2014 GMC Sierra:
Step 1: Warm Up The Engine
Start the engine and let it run for a few minutes. Warm oil flows out more easily. Turn off the engine before you start working.
Step 2: Lift The Truck
Use a jack to lift the front of the truck. Make sure it is secure. Place jack stands under the truck for safety. Never work under a truck that is only supported by a jack.
Step 3: Locate The Oil Drain Plug
The oil drain plug is under the engine. Find it and place the drain pan underneath. The drain plug looks like a bolt.
Step 4: Remove The Oil Drain Plug
Use a socket wrench to remove the drain plug. Be careful, the oil might be hot. Let the oil drain into the pan. This can take a few minutes.
Step 5: Remove The Oil Filter
Find the oil filter. It looks like a small metal can. Use the oil filter wrench to remove it. Some oil might spill, so be ready with rags.
Step 6: Install The New Oil Filter
Take the new oil filter. Put a little bit of new oil on the rubber seal. This helps it seal better. Screw it on by hand. Do not use the wrench to tighten it.
Step 7: Replace The Oil Drain Plug
Once all the old oil has drained, put the drain plug back. Tighten it with the socket wrench. Do not over-tighten it.
Step 8: Add New Oil
Find the oil fill cap on top of the engine. Remove it and place the funnel in the opening. Pour in the new oil. Check your manual for the right amount. Usually, it is about 6 quarts.
Step 9: Check For Leaks
Start the engine and let it run for a few minutes. Check under the truck for leaks. If there are no leaks, you are done!
How Often Should You Change the Oil?
For the 2014 GMC Sierra, change the oil every 5,000 to 7,500 miles. Check your manual for the best schedule. Regular oil changes keep your truck running well.
Benefits of Changing Your Own Oil
Changing your own oil has many benefits:
- Save money
- Learn more about your truck
- Ensure the job is done right
Common Mistakes to Avoid
Here are some mistakes to avoid when changing your oil:
- Not using the right type of oil
- Over-tightening the oil filter
- Not checking for leaks
- Forgetting to replace the drain plug
Credit: m.youtube.com
Frequently Asked Questions
How Often To Change Oil In 2014 Gmc Sierra?
Oil should be changed every 3,000-5,000 miles or as per the owner’s manual.
What Oil Type For 2014 Gmc Sierra?
Use SAE 5W-30 full synthetic oil for optimal performance.
How Much Oil Does 2014 Gmc Sierra Need?
The 2014 GMC Sierra requires 8 quarts of oil with filter change.
Can I Use Synthetic Oil In 2014 Gmc Sierra?
Yes, synthetic oil is recommended for better engine protection.
Conclusion
Changing the oil in your 2014 GMC Sierra is easy. Just follow these steps. Your truck will thank you for it. Regular oil changes keep your engine healthy. Now you can do it yourself!
